Hydraulic Stationary Type Dock Leveller/Dock Leveler/Fixed Dock Leveler

Dock Leveller

-Dock leveller is used for modern workshops/warehouse and vehicles for automatic loading and unloading.
-Connect the platform and vehicle case in different heights.
-Smooth the loading and unloading process.
-Enhance the efficiency.
-Loading equipment for modern warehouses.

TheRotating lip Dock levelers are more economic, the vehicle docks to the loading bay and contacts the bumper, the leveler is raised, the lip is opened and laid onto the truck procedure starts.
The telescopic dock levelers have extending lips and overlap the truck-bed to suit special loading requirements; they are indispensable for the "Deep Cold Bays".
Dock levelers are supplied in several versions, for the different building systems of the pits, the best system is the prefabrication that gives sure, rapid, economic results, avoiding mistakes.

IMPORTANT CHARACTERISTICS OF THE DOCK LVEVLERS
For rotating lip Dock levelers the self-cleaning lip that reduces the normally present dock debris pallet pieces, nail, screws and bolts etc.
.Automatic side flaps for the reduction of the width of the lip, for narrow truck beds, automatically closing when the lip is extended and touches the sides of the van;
.Leveler width as much wide as the truck bed(EN 1398 point 5.2.4.1).The standard widths are 2000 and 2200mm
.Such length as to remain within the working slopes that the fork lifts can climb (normally 8%and 4%)
.Galvanized finishing in case of use in damp places, and where intensive wash downs are carried out;
Carrying capacity (concentrated on fork lift, as per Norm EN 1398) standardized at 6000 and 9000kg (special).